Automatic Barriers

VIGIGUARD Automatic Boom Barriers offer efficient security at exit and entry points of factories, office complexes, condominiums, parking lots, toll plazas, or any roadway entry where medium to heavy traffic is expected. It is aesthetically designed with sleek and modern looks. Features include an inbuilt anti-crush safety device, which suspends the motion of the barrier, should it meet any obstruction. Optional beam sensor provides further protection to vehicles. Auto-close of barrier can be programmed through the controller. Duration of fast and slow speeds is programmed at the time of installation, according to the length of the boom and frequency of traffic expected. However its electronic control panel is designed to accept signals from various controls and safety accessories. All these features make VIGIGUARD the best in class entrance control equipment for your safety.

Features :

• High torque motor: Long lasting motor that generates up to 600Nm torque.
• Smooth operation: No bounce/jerk of boom at end positions.
• Better visibility: White aluminium boom bar with reflective strips and RAL 2005 powder coated housing.
• IP54 protection: Control unit is IP - protected making it dust and water resistant.
• Optical beam sensor: Safety device to detect presence of vehicles and reversal of boom movement.
• Access control operation: Barrier operated through push button switch and can also be operated through access control system.
• Manual operation in case of power failure: Barrier can be raised or lowered by releasing the boom lock with key type mechanism.

Optional Accessories:

• Bar with protective rubber profile : To prevent injury in case of any contact.
• Circular boom section : Optional boom profile used in case of a windy area
• Loop detector
• Traffic/Flashing light

Rapid, reliable, and economical processing of road users is essential when collecting toll charges at bridges, tunnels and on roads. Toll barriers from Magnetic have been specially designed for this situation. The innovative MHTM™ drive at the heart of the barriers is characterised by its speed, lack of maintenance and energy efficiency, and thus keeps long-term costs down. The Toll barriers can be adapted to meet individual requirements: there are five models with opening times of from 1.3–0.3 s, which can be equipped with a variety of control devices, flanges and barrier booms. All barrier boom types can be provided with swing-away flange. In the case of a collision with a vehicle, the barrier boom is released and can be manually re-engaged afterwards. This protects the barrier boom and the drive unit. There is also the optional auto-swing-away flange for the soft boom, which automatically re-engages after a collision with a vehicle.

Features

• Opening and closing times down to 0.3 s
• Very low operating costs thanks to efficient and long-lived MHTM™ drive
• Highly user-friendly and with optimum accessibility
• Prizewinning design: German Design Award 2014 and red dot design award 2012
• Designed for 10 million opening and closing cycles